Gas Bubblers and Washing Bottles
Synthware™ Bubbler
Bubbler has a small ball joint to prevent oil from being sucked back under sudden negative pressure
Corning™ PYREX™ Gas Washing Tall-Form Bottles with Fritted Discs - Without Stopper Assembly
Large hexagonal base for stability
Synthware™ Mineral Oil Bubbler
Mineral Oil Bubbler used to monitor gas flow to reactions while providing a vent to the atmosphere.
Synthware™ Kjeldahl Trap Adapter
Features two standard taper inner joints parallel to one another with Kjeldahl trap at lower end
Eisco™ Woulff Gas Wash Bottles
High quality borosilicate 3.3 glass bottles with two ground joint parallel necks
Chemglass Life Sciences Bubbler, Airfree, Schlenk
Bubbler, Airfree, Schlenk. Used to monitor gas flow to reactions while providing a vent to the atmosphere. Reservoir head prevents oil from being sucked back into the system. Volume below the sidearm is approx 40mL. Bubbler has an 8mm OD top and side tubulations.
Chemglass Life Sciences Complete 500mL Bottle, Gas Washing, Tall Form, Coarse Frit, 380mm Approx. OAH
Complete 500mL Bottle, Gas Washing, Tall Form, Coarse Frit, 380mm Approx. OAH. Tall form gas washing bottle having a standard taper 34/28 top joint, hex base and coarse fritted tube for gas dispersion. Stopper is held in place with two CG-110-02, 18mm stainless steel springs. Springs are supplied when bottle is ordered complete.
Chemglass Life Sciences Bubbler, Pressure Release, Airfree, Schlenk
Bubbler, Pressure Release, Airfree, Schlenk. Design of bubbler allows for fine control of purge gas within an inert gas system such as a manifold. Purge gas enters bubbler thru hose connection A & exits thru connection B which is connected to manifold. The large capacity of main chamber C allows for rapid purging w/check valve protection of the inert gas source D. The constriction of the large chamber prevents oil from being drawn back into the system. The small chamber E is equipped with a pressure release valve that is adjustable from 2 to 49 PSI (4 PSI is recommended for most vacuum, inert systems). When charging the system to the correct pressure setting, the bubbler in the main chamber will cease to operate & permit any over-pressure to escape thru small chamber E. Approx dimensions are 150mm W x 300mm H. Hose connections are 11mm OD at the largest ring.PLEASE NOTE: CHAMBER D & E MUST BE FILLED HALF WAY W/MINERAL OIL FOR PROPER OPERATION.
Ace Glass, Inc. 500ML POR C BOTTLE 500ML POR C BOTTLE
500mL gas washing bottle with porosity C (25-50 micron) fritted disc and 29/42 joint. Inlet/outlet arms are 8mm O.D.
Chemglass Life Sciences Bubbler, Pressure Release, 130mm Height x 100mm Width x 100mm Depth
Bubbler, Pressure Release, 130mm Height x 100mm Width x 100mm Depth. Used for the purging of AIRFREE or vacuum apparatus with an inert gas. The pressure release valve is connected on one side to the low pressure gas source and the other side to a manifold or reaction vessel. The check valve prevents oil and air from being pulled into the apparatus. Hose connections are 10mm at the largest serration.
Ace Glass, Inc. Bottle, gas washing, 500mL, porosity B fritted disc, Ace-Threds
500mL capacity Gas Washing Bottle with the convenience of Ace-Threds. The center washing tube fits into the borosilicate glass bottle via a #25 Ace-Thred with a nylon bushing and a FETFE o-ring. The washing tube has #7 Ace-Safe inlet/outlet ports with 1/4 hose connections. The bottom fritted disc is 70-100 micron porosity.
Chemglass Life Sciences Reservior Only, Airfree, Schlenk
Reservoir Only, Airfree, Schlenk. Replacement part for AF0513A21. Complete bubbler consists of the lower reservoir, adjustable inner tube, compression cap and Viton o-ring.
Chemglass Life Sciences Bubbler, Modified, 14/20 Inner Joint, 130mm OAH, Airfree, Schlenk
Bubbler, Modified, 14/20 Inner Joint, 130mm OAH, Airfree, Schlenk. Used to monitor gas flow to reactions while providing a vent to the atmosphere. Reservoir head prevents oil from being sucked back into the system. Standard taper inner joint is for use in single or multi-neck flasks. Hose connection has a 9mm OD middle serration.
Chemglass Life Sciences Bottle, 1000mL, Gas Washing, Complete, 34/28, Coarse Fritted Disc
Bottle, 1000mL, Gas Washing, Complete, 34/28, Coarse Fritted Disc. Large capacity, low form gas washing bottle having a 34/28 standard taper top outer joint. Filter candle is 25mm O.D. x 70mm long allowing a large gas flow to be dispersed throughout the absorbing material. COARSE porosity filter candle. Complete bottle is supplied with one each CG-145-07 size 34 Keck clamp.